Intrex, an experienced aerospace contract manufacturer

In Aerospace Machining Eliminating Burrs is Critical

Oct 08, 2026

In Aerospace machining deburring is critical. As a provider of aerospace machined components, where tolerances are tight and failure is not an option, deburring is a critical finishing step. In the machining process regardless of material, burrs are produced.  Burrs are the small ridges, slivers, and raised edges that are the unwanted residuals of the cutting, drilling, turning or milling process. On standard consumer products burrs might be a cosmetic nuisance but on an aircraft components, they can be catastrophic.

Aerospace machining deburring

Why Deburring in Aerospace is Important

  • Fatigue and structural integrity. Aerospace parts endure constant cyclic loading, vibration, and thermal stress. A burr or sharp edge acts as a stress concentrator, giving cracks a place to start. Deburring and edge-breaking to a specified radius, spread stress more evenly and extend component life.
  • Fit, assembly, and sealing. Aerospace assemblies rely on precise mating of surfaces. A burr can prevent parts from seating properly, throw off alignment, interfere with fasteners, or compromise a seal.
  • Safety and loose debris. Undetected burrs can break off during service or assembly. These burrs (small metal fragments) can wreak havoc to hydraulic lines, fuel systems, or engine assemblies. They can clog filters, score sealing surfaces, jam valves, or damage bearings. In flight-critical systems, contamination like this can cause serious malfunctions.
  • Handling and personnel safety. During components assembly, sharp edges can present a safety hazard to technicians: cut skin, tear gloves, damage wiring harnesses, and cut tubing.
  • Coating and surface treatment performance. Anodizing, plating, painting, and shot peening all depend on well-prepared edges. Coatings tend to thin or crack over sharp edges, leaving areas vulnerable to corrosion.
  • Regulatory and quality requirements. Aerospace standards and customer specifications, such as AS9100 quality systems and drawing notes calling for broken edges, mandate-controlled edge conditions. Inspection and traceability requirements mean un-deburred parts are often rejected outright.

Intrex Deburring Process Considerations

At Intrex we machine many aerospace materials: stainless steel, titanium, inconel, TZM, multiple grades of aluminum. Many of our parts require thin-wall machining and burrs form readily. Deburring must be done skillfully and carefully.  With over  40+ years of aerospace machining experience, we have learned and utilize an assortment of methods and techniques to eliminate burrs. Our methods include:

  • Inspection under magnification/Manual deburring – Many parts with elaborate geometries (ID/OD) that can best be inspected by trained staff using some level of magnification.
  • In-process deburring – Done in the CNC machine within the machine cycle, using an assortment of deburring tooling, rotary brushes, employing the precision of the CNC machine tool to direct the deburring tools with controlled prescribed times.
  • Robotic Systems – Post machining multi-axis robots with programmable features provide very consistent deburred finished parts.
  • Multiple Deburring Machines and Materials – Because of the varied materials Intrex utilizes vibratory tumblers using different media (size/shape/grit) depending on material and the configuration of the machined part. We also use hand tools, rotary brushes, standard abrasives of varying weights, and 3-D composite abrasives. All are carefully selected to remove burrs without damaging critical part features.

In short, we recognize the importance of understanding and managing the deburring process. It protects performance, safety, and reliability, making it an essential part of producing airworthy components.

If you would like more information about our company or have a conversation with us about our company and our capabilities, we would welcome that opportunity.Please click here.

High-Level Services

Intrex Aerospace is a world-class manufacturer of precision CNC machined components for the aviation, defense, and space industries.

Supply Chain Buyer
Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews

"Intrex has excellent customer service. They honor their commitments. I enjoy working with the entire team."

Aerospace Quality Manager
Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews

"We can count on Intrex to take critical to quality work. They are a superior company focused on quality and customer service."

Aerospace Supply Chain Manager
Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews Intrex Aerospace Reviews

"Intrex is a strategic supplier of ours. We consider them our partner. We can count on them and when a key project is in their hands, I never worry."

Work With Us
Careers

We Need Your Skills

Intrex Aerospace is a growing, dynamic organization. We are proud of our rich and rewarding work environment. We place great value on our employees and recognize the key role they play in our continued success. Being in a growth industry, we are always looking to attract and develop new, motivated employees.

Apply Now